5/9/2023 0 Comments Radiometer point measure![]() If my conveyor belt is very long, when the UV energy meter reaches the middle position of the conveyor belt, no one will manually press the measuring button. If it is a fixed-point test, in addition to the four UV radiometers mentioned above, you can also choose the Linshang LS125 UV radiometer. ![]() Some curing machines are relatively small and disc type UV energy meters can’t be placed. Some customers test at a fixed point and some customers need to place the UV energy meter on the conveyor belt for testing. In addition to the curing light source and measurement range, it is also very important for customers to use UV radiometers. Choose UV radiometer according to applicationīefore choosing a suitable UV radiometer, you must know your needs. This is a true large measurement range UV radiometer. The power measurement range of LED UV radiometer is 0-40000 mW / cm². The energy measurement range of Linshang UV radiometer is 0-999999mJ / cm², the power measurement range of mercury lamp UV radiometer is 0-2000mW / cm². Therefore, before purchasing, be sure to confirm the measurement range of the instrument. Many customers worry that after purchasing a UV radiometer, the measured data is not accurate due to insufficient range. The energy measurement range and power measurement range are also a problem that most customers are very concerned about when purchasing a UV radiometer. If you want to know which UV radiometer is suitable for you and how much does a UV radiometer cost, you can refer to the detailed parameters of the instrument below.Ģ. As a professional UV radiometer manufacturer, Linshang Technology has developed a UV radiometer for high-pressure mercury lamps and UV LED light sources-LS120, LS128, LS130 and LS131. If your light source is a gallium lamp, UV LED light source, you can choose LED UV radiometer. If the ultraviolet light source used for curing is a high-pressure mercury lamp and a halogen lamp, a mercury lamp UV energy meter should be selected. Most UV radiometers on the market are designed for high-pressure mercury lamps. After a customer purchased a UV radiometer, they found that the instrument did not match their UV light source, precisely because they did not purchase a corresponding UV radiometer based on the light source they used. UV LED light sources are used for curing at 365nm, 375nm, 385nm, 395nm, 405nm, etc. 365nm wavelength is mainly used for the curing of high-pressure mercury lamps, halogen lamps, while 417nm, wavelength is mainly used for gallium lamps for curing, which is often referred to as 420nm. Commonly used curing light sources include high-pressure mercury lamps, halogen lamps, gallium lamps and UV LED light sources. The curing light sources used in different industries are different. Choose UV radiometer according to UV curing light source
0 Comments
Leave a Reply. |